ecommerce

Maintenance document number : NM115

The Definox CAR non-return valve allows the fluid to pass in only one direction and prevents any backflow. It uses a guided plug with spring return. Robust and hygienic in design, the CAR is perfectly cleanable and allows quick maintenance. It is available with welding ends or clamps, with different types of sealing to meet the constraints of your processes

Maintenance document number : NM120

The Definox DBAX pneumatically actuated ball valve completes the range of process valves. It is suitable for auxiliary circuits. Full or reduced bore depending on the diameters. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control top

Maintenance document number : NM251

The Definox DCX3 single seat valve is a shut-off valve. Robust and hygienic in design, the DCX3 is perfectly cleanable. Its patented seal technologies allow the DCX3 to have quick maintenance and reduced OPEX costs. Thanks to its modularity, the DCX3 can cover a wide range of applications and process configurations. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control topThe Definox DCX3 aseptic single seat valve is a shut-off valve dedicated to sterile processes. It is equipped with a deformable membrane ensuring physical protection between the process and contamination from the atmosphere. Its patented seal technologies allow the DCX3 aseptic to have quick maintenance and reduced OPEX costs. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control top.

Maintenance document number : NM251

The Definox DCX3 aseptic single seat valve is a shut-off valve dedicated to sterile processes. It is equipped with a deformable membrane ensuring physical protection between the process and contamination from the atmosphere. Its patented seal technologies allow the DCX3 aseptic to have quick maintenance and reduced OPEX costs. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control top.

Maintenance document number : NM251

The Definox DCX3 relief single seat valve allows precise adjustment of the calibration value and the possibility of sealing the preset pressure value. Exceeding this pressure causes the valve to open, which allows the main circuit to be unloaded to protect certain devices or circuits. The DCX3 relief valve can also be opened during CIP phases. Robust and hygienic in design, it has the same advantages as the DCX3. It can be fitted with a Sorio control top.

Maintenance document number : NM119

The Definox DCX3FC single seat valve is a tank bottom valve. Equipped with a mass flange, it is used to isolate the tank from the process during the emptying or filling phases of the tanks. The DCX3FC is available as a valve exiting into the tank (raising plug) or entering the valve (lowering plug). Robust and hygienic in design, the DCX3FC is perfectly cleanable. Its patented seal technologies allow the DCX3FC to have quick maintenance and reduced OPEX costs. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control top. Also available in long stroke version for complete clearance of the valve and to preserve the consistency of the fluid.

Maintenance document number : NM230

The Definox DCX3 REGUL is a regulating valve intended for hygienic processes. Equipped with a pneumatic actuator and a positioner, it allows precise regulation of a flow rate from a 4-20mA or 0-10V signal. Available with different plugs profiles, with or without sealing , the different configurations of the DCX3 REGUL will meet your needs. Several options are also available for sterile processes such as the version with membrane or steam barrier.

Maintenance document number : NM251

The Definox DCX4 single seat valve is a divert valve. Robust and hygienic in design, the DCX4 is perfectly cleanable. Its patented seal technologies allow the DCX4 to have quick maintenance and reduced OPEX costs. Thanks to its modularity and its choice of bodies, the DCX4 can cover a wide range of applications and process configurations. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control top.

Maintenance document number : NM251

The Definox DCX4 aseptic single seat valve is a divert valve dedicated to sterile processes. It is equipped with a deformable membrane ensuring physical protection between the process and contamination from the atmosphere. Its patented seal technologies allow the DCX4 Aseptic to have quick maintenance and reduced OPEX costs. Equipped with a single-acting pneumatic actuator (NO/NC), it can be fitted with a SORIO control top.